-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
Recommended Extras
Hand-picked recommendations to go alongside this product
The Drench difference
Elegant 3 tap hole configurations are getting ever more popular and with the Anglesey 3 Tap Hole Basin Mixer by Burlington, we can certainly see why.In the centre, your mixer spout will proudly sit with a beautiful pop up waste lever that fits seamlessly into the design of the tap. On either side of the elegant spout will sit your hot and cold water valves with the contemporary four spoke Anglesey tap heads with beautiful ceramic Burlington branded decorative caps. Burlington have also designed a Anglesey range of bath and shower mixer taps so you can create a cohesive and designer look across your beautiful new bathroom.
Your new tap will continue to impress not only with its stylish looks but also, how easy and smooth it is to use thanks to the ceramic disc inside the valves. Ceramic disc technology also improves the durability of your tap, whilst also preventing the annoying drip-drop previously experienced with older style rubber washers, leaving you with a peaceful bathroom at last. You'll also receive a Neoperl Aerator and Flow Straightener to use with high and low water pressures respectively, giving you a consistent flow of water and minimising any splash back.
This basin mixer tap is available in a Regent option which is 3cm taller than the standard tap. The Regent option creates an opulent feel and will ensure compliance with older building regulations.
Features:
Standard Dimensions:
Regent Dimensions:
Your new tap will continue to impress not only with its stylish looks but also, how easy and smooth it is to use thanks to the ceramic disc inside the valves. Ceramic disc technology also improves the durability of your tap, whilst also preventing the annoying drip-drop previously experienced with older style rubber washers, leaving you with a peaceful bathroom at last. You'll also receive a Neoperl Aerator and Flow Straightener to use with high and low water pressures respectively, giving you a consistent flow of water and minimising any splash back.
This basin mixer tap is available in a Regent option which is 3cm taller than the standard tap. The Regent option creates an opulent feel and will ensure compliance with older building regulations.
Features:
- Suitable for both high and low pressure water systems
- Supplied with Neoperl Aerator for high pressure water flow, a Neoperl Flow Straightener for low pressure water flow and a Neoperl Key for installation
- Comes with Ceramic Disc quarter turn technology
- Made from Brass and Chrome Plated
- Supplied with Pop-up waste
- 10 year manufacturers guarantee
Standard Dimensions:
- Height: 125mm
- Width: 248mm
- Projection: 126mm
Regent Dimensions:
- Height: 152mm
- Width: 248mm
- Projection: 126mm
| Cleaning Instructions |
|---|
| Product Code | AN12-PV |
|---|---|
| Type | 3 Hole Basin Mixer Taps, Basin Mixer Taps |
| Brand | Burlington |
| Brand Range | Burlington Anglesey |
| GuaranteeMore information | 10 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| Cartridge TypeMore information | Ceramic Disc |
|---|---|
| Popular Features | Waste Included |
| Material | Brass |
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
| Shape | Curved |
|---|---|
| Mounting Type | Deck Mounted |
| Finish Texture | Polished |
| Finish | Chrome |
| Style | Traditional |
| Tap Holes | 3 Holes |
| Handle Type | Crosshead, Dual Control |
| Spout TypeMore information | Fixed Spout, Straight Spout |
Tap spouts are available in a variety of different styles which have an effect on both the look and function of your tap. Different spout types will have different heights and projections, so it’s important to choose one which will complement your basin or bath.
| Width (mm) | 248 |
|---|---|
| Depth (mm) | 126 |
| Height (mm) | Select an option first |
| Minimum Water PressureMore information | 0.2 |
|---|
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
