-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
Recommended Extras
Hand-picked recommendations to go alongside this product
The Drench difference
The Birkenhead Deck Mounted Bath Mixer Tap by Burlington - an understated yet luxurious finishing touch to your traditionally-styled bathroom. Beautiful curves feature throughout from the authentic wide nose spout, up to the quirky and eye-catching Birkenhead six spoke tap heads that are topped off with the Burlington branding on the ceramic caps. Now you can fill your bath with opulence and style.
Traditional on the inside, yet packed full of modern technology, this bath tap will be sure to impress. Ceramic disc technology will make filling your bath a smooth and easy experience, giving you more precise control of the temperature and flow, whilst also preventing against excess dripping once turned off. You'll also receive a Neoperl Aerator and Neoperl Flow Straightener to ensure no matter your water pressure, you'll always get a consistent and steady flow of water.
This bath mixer tap is also available in a Regent option which is 3cm taller than the standard bath tap. The Regent option creates an opulent feel and will ensure compliance with older building regulations.
Features:
Standard Dimensions:
Regent Dimensions:
Traditional on the inside, yet packed full of modern technology, this bath tap will be sure to impress. Ceramic disc technology will make filling your bath a smooth and easy experience, giving you more precise control of the temperature and flow, whilst also preventing against excess dripping once turned off. You'll also receive a Neoperl Aerator and Neoperl Flow Straightener to ensure no matter your water pressure, you'll always get a consistent and steady flow of water.
This bath mixer tap is also available in a Regent option which is 3cm taller than the standard bath tap. The Regent option creates an opulent feel and will ensure compliance with older building regulations.
Features:
- Suitable for both high and low pressure water systems
- Supplied with Neoperl Aerator for high pressure water flow, a Neoperl Flow Straightener for low pressure water flow and a Neoperl Key for installation
- Comes with Ceramic Disc quarter turn technology
- Regent option is 3cm taller than the standard bath tap
- Made from Brass and Chrome Plated
- Waste is not included
- 10 year manufacturers guarantee
Standard Dimensions:
- Height: 187mm
- Width: 206mm
- Projection: 130mm
Regent Dimensions:
- Height: 214mm
- Width: 206mm
- Projection: 130mm
| Cleaning Instructions |
|---|
| Product Code | BI23-PV |
|---|---|
| Brand | Burlington |
| Brand Range | Burlington Birkenhead |
| GuaranteeMore information | 10 Years |
| Type | Select an option first |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| Cartridge TypeMore information | Ceramic Disc |
|---|---|
| Number of OutletsMore information | 1 Outlet |
| Material | Brass |
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
This indicates how many water outlets you can pair with your shower valves. Choosing valves with more outlets will give you flexibility over the number of products you can add to your shower.
Each outlet from your shower valve will divert water to the section of your shower that needs it, so each extra outlet allows you to add another product. For example: with 1 outlet you could have just a fixed shower head. 2 outlets will allow you to have a fixed shower head and shower handset. 3 will allow both of these with the addition of a body jet.
| Shape | Curved |
|---|---|
| Mounting Type | Deck Mounted |
| Finish Texture | Polished |
| Finish | Chrome |
| Style | Traditional |
| Tap Holes | 2 Holes |
| Handle Type | Crosshead |
| Spout TypeMore information | Curved Spout |
Tap spouts are available in a variety of different styles which have an effect on both the look and function of your tap. Different spout types will have different heights and projections, so it’s important to choose one which will complement your basin or bath.
| Width (mm) | 206 |
|---|---|
| Depth (mm) | 165 |
| Projection (mm) | 130 |
| Height (mm) | Select an option first |
| Minimum Water PressureMore information | 0.2 |
|---|
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
