-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
Recommended Extras
Hand-picked recommendations to go alongside this product
The Drench difference
The Claremont Deck Mounted Bath Shower Mixer with S Adjuster by Burlington - the perfect finishing touch to your new freestanding bath. Traditionally designed, this bath mixer tap oozes period charm and opulence, and will no doubt fill your bath with style. Featuring Burlington's signature, four spoke Claremont tap heads that are topped off with ceramic Burlington-branded decorative caps, you can control the temperature of your water. Control the flow of water using the enviably stylish chunky ceramic divider. Burlington have also designed a co-ordinating range of Claremont basin taps so you can create a cohesive, designer look across your beautiful new bathroom.
As well as the beautiful tap, you'll receive a Ceramic telephone headset for showering, a traditionally styled cradle and an "S" adjuster that swivels so you can position the telephone handset over the bath once your done so no more dripping on the floor. And with ceramic disc and Neoperl flow straightener and aerator technology, your bath tap will be smooth and easy to use and can be used with low through to high pressure systems.
Burlington have also designed this tap with optional angled tap heads so you can see your bath tap at the correct angle when you walk into your bathroom.
This bath shower mixer tap is also available in a Regent option which is 3cm taller than the standard bath tap. The Regent option creates an opulent feel and will ensure compliance with older building regulations.
Features:
Standard Dimensions:
Regent Dimensions:
As well as the beautiful tap, you'll receive a Ceramic telephone headset for showering, a traditionally styled cradle and an "S" adjuster that swivels so you can position the telephone handset over the bath once your done so no more dripping on the floor. And with ceramic disc and Neoperl flow straightener and aerator technology, your bath tap will be smooth and easy to use and can be used with low through to high pressure systems.
Burlington have also designed this tap with optional angled tap heads so you can see your bath tap at the correct angle when you walk into your bathroom.
This bath shower mixer tap is also available in a Regent option which is 3cm taller than the standard bath tap. The Regent option creates an opulent feel and will ensure compliance with older building regulations.
Features:
- Included: Bath shower mixer tap, standard cradle, "S" adjuster, ceramic diverter, hose, ceramic telephone handset, deck mounting unions, Claremont tap handles, and Neoperl Aerator and Flow Straightener
- Suitable for both high and low pressure water systems
- Supplied with Neoperl Aerator for high pressure water flow, a Neoperl Flow Straightener for low pressure water flow and a Neoperl Key for installation
- Comes with Ceramic Disc quarter-turn technology
- Made from Brass and Chrome Plated
- Waste is not included
- 10 year manufacturers guarantee
Standard Dimensions:
- Height: 503mm
- Width: 236mm
- Projection: 130mm
Regent Dimensions:
- Height: 530mm
- Width: 236mm
- Projection: 130mm
| Cleaning Instructions |
|---|
| Product Code | CL15-PV |
|---|---|
| Type | Bath Shower Mixers |
| Brand | Burlington |
| Brand Range | Burlington Claremont |
| GuaranteeMore information | 10 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| Cartridge TypeMore information | Ceramic Disc |
|---|---|
| Number of OutletsMore information | 2 Outlets |
| Material | Brass |
| Temperature Control | Manual |
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
This indicates how many water outlets you can pair with your shower valves. Choosing valves with more outlets will give you flexibility over the number of products you can add to your shower.
Each outlet from your shower valve will divert water to the section of your shower that needs it, so each extra outlet allows you to add another product. For example: with 1 outlet you could have just a fixed shower head. 2 outlets will allow you to have a fixed shower head and shower handset. 3 will allow both of these with the addition of a body jet.
| Mounting Type | Deck Mounted |
|---|---|
| Finish Texture | Polished |
| Finish | Chrome |
| Style | Traditional |
| Tap Holes | 2 Holes |
| Handle Type | Crosshead, Lever, Triple Control |
| Spout TypeMore information | Curved Spout |
| Shape | Select an option first |
Tap spouts are available in a variety of different styles which have an effect on both the look and function of your tap. Different spout types will have different heights and projections, so it’s important to choose one which will complement your basin or bath.
| Projection (mm) | 130 |
|---|---|
| Width (mm) | Select an option first |
| Height (mm) | Select an option first |
| Depth (mm) | Select an option first |
| Minimum Water PressureMore information | 0.2 |
|---|
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
