-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
Recommended Extras
Hand-picked recommendations to go alongside this product
The Drench difference
From the makers of exquisitely designed bathroom brassware, comes the Crosswater Belgravia Crosshead Floorstanding Bath Shower Mixer Tap with Shower Kit. The perfect pairing to your luxurious roll top, slipper bath or traditionally-styled freestanding bath, this tap will add an elegant feature point in your bathroom finishing off the authentically traditional look you're after. Intricate detailing features throughout, from the stylish floor fixings, the branded decorative ceramic heads and ball ended spokes on the temperature valves, through to the smooth angles and wide spout that will elegantly pour water into your bath.
You'll also receive a telephone handset to hold your ceramic handle shower handset when not in use. Conveniently placed, you can easily wash the bubbles from your hair simply by using the beautiful Ceramic diverter lever. And with Ceramic Disc technology in the valves, you'll only need a quarter turn to operate and your tap will be drip free thanks to their durability.
Made from solid Brass, your new Belgravia bath tap also comes with three choices of finish. Crosswater have also designed a matching range of basin and shower brassware in all finishes so you can create an elegant and cohesive scheme across your traditionally-styled bathroom.
Features:
Dimensions:
You'll also receive a telephone handset to hold your ceramic handle shower handset when not in use. Conveniently placed, you can easily wash the bubbles from your hair simply by using the beautiful Ceramic diverter lever. And with Ceramic Disc technology in the valves, you'll only need a quarter turn to operate and your tap will be drip free thanks to their durability.
Made from solid Brass, your new Belgravia bath tap also comes with three choices of finish. Crosswater have also designed a matching range of basin and shower brassware in all finishes so you can create an elegant and cohesive scheme across your traditionally-styled bathroom.
Features:
- Legs 702mm (not adjustable)
- Height:1102mm
- Projection: 165mm
- Suitable for high pressure systems only - minimum 1.0 bar water pressure is recommended
- Ceramic disc technology for smooth operation and no excess dripping or leaking once turned off
- Made from Brass with your a Chrome finish
- WRAS approved
- Waste is sold separately
- 15 year manufacturers guarantee
Dimensions:
- Tap Height: 400mm
- Overal Height: 1102mm
- Projection: 165mm
- Leg adjustment distances: 150mm min - 180mm max
| Cleaning Instructions |
|---|
| Product Code | crosswater-bel-bath-shwr-mxr-ch |
|---|---|
| Type | Bath Shower Mixers, Floorstanding Bath Shower Mixers |
| Brand | Crosswater |
| Brand Range | Crosswater Belgravia Crosshead |
| GuaranteeMore information | 15 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| Cartridge TypeMore information | Ceramic Disc |
|---|---|
| Number of OutletsMore information | 2 Outlets |
| Material | Brass |
| Temperature Control | Manual |
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
This indicates how many water outlets you can pair with your shower valves. Choosing valves with more outlets will give you flexibility over the number of products you can add to your shower.
Each outlet from your shower valve will divert water to the section of your shower that needs it, so each extra outlet allows you to add another product. For example: with 1 outlet you could have just a fixed shower head. 2 outlets will allow you to have a fixed shower head and shower handset. 3 will allow both of these with the addition of a body jet.
| Shape | Round |
|---|---|
| Mounting Type | Freestanding |
| Style | Traditional |
| Tap Holes | 2 Holes |
| Handle Type | Crosshead, Lever, Triple Control |
| Spout TypeMore information | Curved Spout |
| Finish Texture | Polished |
| Finish | Polished Chrome |
Tap spouts are available in a variety of different styles which have an effect on both the look and function of your tap. Different spout types will have different heights and projections, so it’s important to choose one which will complement your basin or bath.
| Height (mm) | 1102 |
|---|---|
| Projection (mm) | 165 |
| Flow Rate at 0.2 Bar (l/min) | 10 |
|---|---|
| Flow Rate at 0.5 Bar (l/min) | 20 |
| Flow Rate at 1 Bar (l/min) | 26 |
| Flow Rate at 3 Bar (l/min) | 31.5 |
| Minimum Water PressureMore information | 1 |
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
