-
Click the image to zoom
-
Click the image to zoom
Recommended Extras
Hand-picked recommendations to go alongside this product
The Drench difference
Mounted on the wall next to your beautiful traditionally-styled pedestal basin or modern countertop basin, you can fill sink with undeniable elegance with the Belgravia Lever Wall Mounted 3 Hole Basin Mixer Tap by Crosswater. The gorgeous curved spout will sit in between the authentically traditional ceramic handled levers that will be easy and smooth to use thanks to the hidden Ceramic Disc technology. The Belgravia range is also customisable to suit your design vision.
The tap itself has been crafted from solid Brass and with a 15 year manufacturers guarantee included as standard, you can be sure your new tap has been built to last.
Features:
Dimensions:
The tap itself has been crafted from solid Brass and with a 15 year manufacturers guarantee included as standard, you can be sure your new tap has been built to last.
Features:
- Waste sold separately
- Suitable for Low, Medium or High Pressure systems - minimum 0.2 bar water pressure is recommended
- Ceramic disc technology for smooth operation and no excess dripping or leaking once turned off
- Made from Brass with a glistening Chrome plated finish
- 15 year manufacturers guarantee
Dimensions:
- Depth: 152mm
- Projection: 141mm
Cleaning Instructions |
---|
Product Code | BL131WNC_LV |
---|---|
Type | 3 Hole Basin Mixer Taps, Basin Mixer Taps, Wall Mounted Basin Mixer Taps |
Brand | Crosswater |
Brand Range | Crosswater Belgravia Lever |
GuaranteeMore information | 15 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
Cartridge TypeMore information | Ceramic Disc |
---|---|
Material | Brass |
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Shape | Round |
---|---|
Mounting Type | Wall Mounted |
Finish Texture | Polished |
Finish | Chrome |
Style | Traditional |
Tap Holes | 3 Holes |
Handle Type | Dual Control, Lever |
Spout TypeMore information | Curved Spout, Fixed Spout |
Tap spouts are available in a variety of different styles which have an effect on both the look and function of your tap. Different spout types will have different heights and projections, so it’s important to choose one which will complement your basin or bath.
Depth (mm) | 152 |
---|---|
Projection (mm) | 141 |
Minimum Water PressureMore information | 0.2 |
---|
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.