-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
Recommended Extras
Hand-picked recommendations to go alongside this product
The Drench difference
How do you completely enhance your showering experience with just one accessory? The Crosswater MPRO Follow Me Round Shower Handset and Hose is not just a marvel of design, but also an eye-catching feature for the contemporary bathroom owner.
Easily mountable, endlessly flexible and incredibly resistant, it's ideal for long-term and heavy use by the whole family. The “wipe clean nozzles” mean limescale disappears in a couple of sponge rubs - allowing you to keep this stunning accessory immaculate for many years to come.
Features:
Dimensions:
Important information: cannot be installed under a direct water flow, such as a fixed shower head.
Easily mountable, endlessly flexible and incredibly resistant, it's ideal for long-term and heavy use by the whole family. The “wipe clean nozzles” mean limescale disappears in a couple of sponge rubs - allowing you to keep this stunning accessory immaculate for many years to come.
Features:
- Follow Me Round shower handset and hose
- Available finishes: Brushed Stainless Steel, Matt Black & Brushed Brass
- Made from Brass and ABS Plastic
- Deck Mounted
- Minimum pressure required: 0.5 bar
- Shower valve sold separately, please see our recommended extras
- Compatible with a Crosswater bath waste only, please see our recommended extras
- 15 year manufacturer’s guarantee
- Shop the full MPRO Range here
Dimensions:
- Height: 197mm
- Width: 45mm
- Depth: 45mm
Important information: cannot be installed under a direct water flow, such as a fixed shower head.
| Product Code | xwater-mpro-ind-follow-shower-handset |
|---|---|
| Type | Shower Handsets |
| Brand | Crosswater |
| Brand Range | Crosswater MPRO |
| GuaranteeMore information | 15 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| Cartridge TypeMore information | Ceramic Disc |
|---|---|
| Material | ABS Plastic, Brass |
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
| Shape | Round |
|---|---|
| Mounting Type | Deck Mounted |
| Style | Modern |
| Finish Texture | Select an option first |
| Finish | Select an option first |
| Width (mm) | 45 |
|---|---|
| Height (mm) | 197 |
| Depth (mm) | 45 |
| Projection (mm) | 45 |
| Minimum Water PressureMore information | 0.5 |
|---|
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
