-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
Recommended Extras
Hand-picked recommendations to go alongside this product
The Drench difference
Fill your bath with pure sophistication and style with the MPRO Overflow Bath Filler with Click Clack Waste by Crosswater. Available in 2 finishes, creating a cohesive and visually exciting scheme. The filler is made of ABS hardened plastic, and the click-clack plug is solid brass. Using an overflow filler is a stylish alternative to using a bath tap whilst also giving you more deck space to hold your luxury products and rest your weary head after a long, hard day. Not only will this product fill your bath, it also acts as an overflow as well as a waste to drain away the bathwater once you've finished relaxing. Paired with bath panel valves, a recessed shower valve or a deck mounted diverter, you can create a minimal and contemporary look in your bathroom with ease.
Features:
Features:
- Slimline overflow projection of only 30mm
- 3 in 1 functions - inlet, outlet and overflow
- Click clack waste included with a flexible overflow pipe for easier installation
- Made from Brass
- Available in 2 finishes
- Suitable for Medium and High Pressure systems only - minimum 0.5 bar water pressure is recommended
- To operate, you will need bath panel valves, a recessed bath or bath and shower valve or a deck mounted diverter (sold separately)
- 15 year manufacturers guarantee
- Shop the full MPRO Range here
| Cleaning Instructions |
|---|
| Product Code | xwater-mpro-ind-of-bath-filler |
|---|---|
| Type | Overflow Bath Fillers |
| Brand | Crosswater |
| Brand Range | Crosswater MPRO |
| GuaranteeMore information | 15 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| Cartridge TypeMore information | Ceramic Disc |
|---|---|
| Material | ABS Plastic, Brass |
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
| Shape | Round |
|---|---|
| Mounting Type | Deck Mounted |
| Style | Modern |
| Spout TypeMore information | Overflow Spout |
| Finish Texture | Select an option first |
| Finish | Select an option first |
Tap spouts are available in a variety of different styles which have an effect on both the look and function of your tap. Different spout types will have different heights and projections, so it’s important to choose one which will complement your basin or bath.
| Height (mm) | 71 |
|---|---|
| Projection (mm) | 44 |
| Flow Rate at 0.5 Bar (l/min) | 15 |
|---|---|
| Flow Rate at 1 Bar (l/min) | 20 |
| Flow Rate at 2 Bar (l/min) | 28 |
| Flow Rate at 3 Bar (l/min) | 34 |
| Minimum Water PressureMore information | 0.5 |
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
Products from the same range
You may also like
Customers also bought
Advice guides
-
How Do You Control Bath Spouts & Overflow Bath Fillers?
In this guide we take you through the world of overflow bath fillers and bath spouts. From different styles to the perfect combinations, we've got everything you need to know to choose to right bath filler or spout. -
Overflow Bath Fillers: An Alternative Way to Fill Your Bath
Overflow bath fillers are not especially new onto the bathroom scene, so it’s surprising how what is a relatively inexpensive way to create wow-factor in your bathroom so often gets overlooked.
