-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
Recommended Extras
Hand-picked recommendations to go alongside this product
The Drench difference
The perfect addition to any minimalistically styled and modern bathroom, the Pier Basin Mixer Tap by Crosswater will no doubt add a touch of luxury to your basin. Featuring a delicately thin spout and lever, the Pier tap is elegant and perfectly formed to fill your basin and to wash your hands with. Thanks to the Ceramic Disc technology Crosswater use across their tap ranges, your new tap will be smooth and easy to use, whilst increasing the lifespan of your tap. Solidly constructed from the finest Brass, the Pier also features a stylish and durable Chrome plated finish that's easy to clean. And with a 15 year manufacturers guarantee you can have peace of mind that your new tap has been built to stand the test of time.
Features:
Dimensions:
Features:
- Suitable for a minimum of 1 bar water pressure
- Ceramic disc technology for smooth operation and no excess dripping or leaking once turned off
- Made from brass with a durable chrome plated finish
- Waste is sold separately
- 15 year manufacturers guarantee
Dimensions:
- Height: 135mm
- Projection: 125mm
| Cleaning Instructions |
|---|
| Product Code | PI110DNC |
|---|---|
| Type | Basin Mixer Taps |
| Brand | Crosswater |
| Brand Range | Crosswater Pier |
| GuaranteeMore information | 15 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| Cartridge TypeMore information | Ceramic Disc |
|---|---|
| Material | Brass |
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
| Shape | Round |
|---|---|
| Mounting Type | Deck Mounted |
| Finish Texture | Polished |
| Finish | Chrome |
| Style | Modern |
| Tap Holes | Mono |
| Handle Type | Lever, Single Control |
| Spout TypeMore information | L-Shaped Spout |
Tap spouts are available in a variety of different styles which have an effect on both the look and function of your tap. Different spout types will have different heights and projections, so it’s important to choose one which will complement your basin or bath.
| Height (mm) | 135 |
|---|---|
| Projection (mm) | 125 |
| Flow Rate at 0.5 Bar (l/min) | 4.93 |
|---|---|
| Flow Rate at 1 Bar (l/min) | 6.79 |
| Minimum Water PressureMore information | 0.2 |
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
