-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
Recommended Extras
Hand-picked recommendations to go alongside this product
The Drench difference
Features:
Dimensions:
- Sparkling polished chrome finish
- WRAS approved basin mixer - click here to read about the WRAS scheme and why it matters
- Easy to use single lever control
- Ceramic disc technology - long-lasting and no drips
- Minimum 1 bar water pressure required
- Basin waste sold separately - please see our recommended extras
- 15 year guarantee from Crosswater
Dimensions:
- Height: 167mm
- Width: 50mm
- Depth: 172mm
- Projection: 130mm
| Cleaning Instructions |
|---|
| Product Code | UB110DNC |
|---|---|
| Type | Basin Mixer Taps |
| Brand | Crosswater |
| Brand Range | Crosswater Union |
| GuaranteeMore information | 15 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| Cartridge TypeMore information | Ceramic Disc |
|---|---|
| AeratorMore information | Yes |
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
| Shape | Round |
|---|---|
| Mounting Type | Deck Mounted |
| Finish Texture | Polished |
| Finish | Polished Chrome |
| Style | Modern |
| Tap Holes | Mono |
| Handle Type | Lever, Single Control |
| Spout TypeMore information | Curved Spout, Fixed Spout, Swan Neck Spout |
Tap spouts are available in a variety of different styles which have an effect on both the look and function of your tap. Different spout types will have different heights and projections, so it’s important to choose one which will complement your basin or bath.
| Width (mm) | 50 |
|---|---|
| Height (mm) | 167 |
| Depth (mm) | 172 |
| Projection (mm) | 130 |
| Minimum Water PressureMore information | 1 |
|---|
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
Products from the same range
You may also like
Customers also bought
Advice guides
-
5 Sounds in Your Bathroom You Should Never Ignore
Noises around the home can be a regular occurrence, but when do these sounds signal an issue we shouldn’t ignore? Bathroom Expert, Dom Lees Bell explains in detail. -
Our Favourite Bathroom Taps
We've put together a plethora of some of our favourite beautiful bathroom taps. We want to show that your home can look stunning without breaking the bank! -
How to Descale and Clean a Tap Cartridge
If you're unsure on the specifics of how to descale and clean your tap cartridge, look no further than this handy guide. You're bound to be an expert on cleaning tap cartridges at the end of this article so knuckle down and get ready for some super useful knowledge! -
What Are Ceramic Disc Taps and Why Would You Want One?
Nowadays, the vast majority of modern bathroom and kitchen taps use ceramic disc cartridges instead of rubber washers. In simple terms, this means no (or at least far fewer) leaks, and only a 90-degree rotation to turn the tap on or off.
