-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
Recommended Extras
Hand-picked recommendations to go alongside this product
The Drench difference
This basin tap and bath shower mixer tap set features a distinctive knurled design, making it a beautiful addition to any bathroom. Both taps are WRAS approved and crafted from high-quality brass, ensuring reliable performance with ceramic disc cartridges that minimise drips and leaks. The detailed knurled texture adds a touch of luxury, while each tap includes an aerated spout that provides a gentle, “champagne-like” flow. The basin tap, complete with a click-clack waste, features a user-friendly single lever for easy control of water temperature and flow. With innovative cold start technology, only cold water is dispensed in the central position, ensuring hot water is used only when required. This design helps reduce unnecessary energy consumption, contributing to savings over time. Each handset also features easy-clean rubber nozzles for hassle-free maintenance. Backed by a 5 year manufacturer’s guarantee, this basin and bath shower mixer tap set is an excellent choice for refreshing your bathroom.
Features:Harbour Clarity Knurled Basin Mixer Tap & Waste
- Comes with a slotted click clack basin waste to pair with basins with an overflow hole
- Knurled detailing adds modern elegance to the design
- Brass body and zinc alloy handle providing durability and antibacterial properties
- Cold start technology saves energy by only heating water when needed
- Ceramic disc technology prevents any unwanted leaks or drips
- Aerated spout mixes air into the water to create a soft, “champagne-like” flow
- Minimum 0.5 bar water pressure
- Single lever control allowing for easy adjustment of water temperature and flow with one hand
- Complies with BS6920 and BSEN200
- WRAS approved
- Includes flexi tails for quick and easy installation
- 5 year manufacturer’s guarantee
Harbour Clarity Knurled Bath Shower Mixer Tap with Shower Kit - Knurled detailing adds modern elegance to the design
- Brass body and zinc alloy handles providing durability and antibacterial properties
- Shower handset manufactured from ABS to provide a tough construction that ensures durability
- 1.5m shower hose is made from PVC which is strong, easy to clean and maintain and won’t scratch your bath
- Ceramic disc technology prevents excess drips and leaks
- Aerated spout mixes air into the water to create a soft, “champagne-like” flow
- Dual lever control for effortless operation of water flow and temperature
- Minimum 0.5 bar water pressure
- Complies with BS5412 and BSEN200
- WRAS approved
- Matching bath waste sold separately, please see our recommended extras
- 5 year manufacturer’s guarantee
| Cleaning Instructions |
|---|
| Product Code | h-cl-knrl-b-tp-w-bth-shr-mxr-kit |
|---|---|
| Type | Basin & Bath Tap Packages |
| Brand | Harbour |
| Brand Range | Harbour Clarity |
| GuaranteeMore information | 5 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| Cartridge TypeMore information | Ceramic Disc |
|---|---|
| AeratorMore information | Yes |
| Popular Features | Easy Clean Nozzles, Waste Included, WRAS Approved |
| Material | Brass, Zinc Alloy |
| Temperature Control | Manual |
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
| Shape | Round |
|---|---|
| Mounting Type | Deck Mounted |
| Style | Modern |
| Handle Type | Dual Control, Lever, Single Control |
| Spout TypeMore information | Curved Spout, Fixed Spout |
| Finish Texture | Select an option first |
| Finish | Select an option first |
Tap spouts are available in a variety of different styles which have an effect on both the look and function of your tap. Different spout types will have different heights and projections, so it’s important to choose one which will complement your basin or bath.
| Hose Length (mm) | 1500 |
|---|
| Minimum Water PressureMore information | 0.5 |
|---|
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
Products from the same range
You may also like
Customers also bought
Advice guides
-
How To Choose Bathroom Taps
Your bathroom taps are most likely going to be with you for a long period of time, so it’s important that you make the right decision when choosing your types of bathroom tap. We’ve put together a handy guide to all the different types of basin taps and their finishes to help make your decision a little easier.
