-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Drag the image to view more angles
-
Click the image to zoom
Recommended Extras
Hand-picked recommendations to go alongside this product
The Drench difference
This Harbour Clarity 2 hole basin mixer will offer a sleek and modern finish to your bathroom that is compatible with all water pressure systems. Being wall mounted offers more space around your basin appealing to a minimalist design. Made from solid brass and finished in a stunning Brushed Brass finish that is both practical and aesthetically pleasing. Not to forget that this is covered by a 10 year manufacturer guarantee offering you peace of mind.
Features:
Dimensions:
Features:
- Modern wall mounted design
- Made from solid brass with zinc alloy handle
- Ceramic disc technology and aerator spout
- Minimum required water pressure: 0.3 bar
- Covered by 10 year manufacturer
Dimensions:
- Height: 112mm
- Projection: 154mm
| Cleaning Instructions |
|---|
| Product Code | HBCLA45 |
|---|---|
| Type | Basin Mixer Taps, Wall Mounted Basin Mixer Taps |
| Brand | Harbour |
| Brand Range | Harbour Clarity |
| GuaranteeMore information | 10 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| Cartridge TypeMore information | Ceramic Disc |
|---|---|
| AeratorMore information | Yes |
| Material | Brass |
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
| Shape | Round |
|---|---|
| Mounting Type | Wall Mounted |
| Finish Texture | Brushed |
| Finish | Brushed Brass |
| Style | Modern |
| Tap Holes | 2 Holes |
| Handle Type | Lever, Single Control |
| Spout TypeMore information | Curved Spout |
Tap spouts are available in a variety of different styles which have an effect on both the look and function of your tap. Different spout types will have different heights and projections, so it’s important to choose one which will complement your basin or bath.
| Height (mm) | 112 |
|---|---|
| Projection (mm) | 154 |
| Flow Rate at 0.1 Bar (l/min) | 2.9 |
|---|---|
| Flow Rate at 0.2 Bar (l/min) | 2.9 |
| Flow Rate at 0.5 Bar (l/min) | 4.5 |
| Flow Rate at 1 Bar (l/min) | 6.4 |
| Flow Rate at 1.5 Bar (l/min) | 7.8 |
| Flow Rate at 2 Bar (l/min) | 9.2 |
| Flow Rate at 3 Bar (l/min) | 11.2 |
| Flow Rate at 4 Bar (l/min) | 12.8 |
| Flow Rate at 5 Bar (l/min) | 14.1 |
| Minimum Water PressureMore information | 0.3 |
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
Products from the same range
You may also like
Customers also bought
Advice guides
-
Our Best Wall Mounted Taps
Wall mounted taps create a beautifully understated focal point, look effortlessly classy and make cleaning around your basin or bath a lot easier!
