-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
Recommended Extras
Hand-picked recommendations to go alongside this product
The Drench difference
Shower in contemporary hotel luxury with the Harbour Clarity Exposed Thermostatic Rigid Riser Shower Kit - Matt Black. This gorgeous shower is more than just meets the eye - sure there’s the stunning aesthetic beauty of the matt black finish and sleek angular design, but what about the practical bits that keep your shower in tip-top condition? The Harbour Clarity sure doesn’t disappoint in this area either.
The Clarity boasts easy clean rubber nozzles to keep maintenance to a minimum, a thermostatic bar shower valve to prevent accidental scalding, and thermostatic technology to ensure your water temperature doesn’t fluctuate. But that’s not all, the Clarity also uses an automatic water shut down system in the event of cold water failure to stop you getting burned, to prevent excess water dripping.
With some truly astonishing safety features, an elegant modern design, and a very comforting 10 year manufacturer’s guarantee, what more could you need from a shower?
Features:
The Clarity boasts easy clean rubber nozzles to keep maintenance to a minimum, a thermostatic bar shower valve to prevent accidental scalding, and thermostatic technology to ensure your water temperature doesn’t fluctuate. But that’s not all, the Clarity also uses an automatic water shut down system in the event of cold water failure to stop you getting burned, to prevent excess water dripping.
With some truly astonishing safety features, an elegant modern design, and a very comforting 10 year manufacturer’s guarantee, what more could you need from a shower?
Features:
- Stylish Matt Black shower package with: bar valve, adjustable riser rail, 3 mode shower handset, slimline overhead shower head and 1.5m hose
- Riser rail with adjustable bracket to give flexibility to your shower
- Easy clean rubber nozzles
- Thermostatic shower valve - prevents accidental scalding
- Thermostatic technology keeps your water temperature from fluctuating
- Automatic water shut down in the event of cold water failure
- Minimum water pressure required: 1 bar
- Shower valve made from brass
- Riser rail and shower head made from stainless steel
- ABS handset and handset holder
- 10 year manufacturer's guarantee against manufacturing faults
- 1 year manufacturer's guarantee for serviceable parts
| Product Code | HBCLA98 |
|---|---|
| Type | Exposed Shower Sets |
| Brand | Harbour |
| Brand Range | Harbour Clarity |
| GuaranteeMore information | 10 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| Cartridge TypeMore information | Ceramic Disc |
|---|---|
| Number of OutletsMore information | 2 Outlets |
| Popular Features | Easy Clean Nozzles, WRAS Approved |
| Material | ABS Plastic, Brass, PVC, Stainless Steel |
| Temperature Control | Thermostatic |
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
This indicates how many water outlets you can pair with your shower valves. Choosing valves with more outlets will give you flexibility over the number of products you can add to your shower.
Each outlet from your shower valve will divert water to the section of your shower that needs it, so each extra outlet allows you to add another product. For example: with 1 outlet you could have just a fixed shower head. 2 outlets will allow you to have a fixed shower head and shower handset. 3 will allow both of these with the addition of a body jet.
| Shape | Round |
|---|---|
| Mounting Type | Wall Mounted |
| Finish Texture | Matt |
| Finish | Matt Black |
| Style | Modern |
| Handle Type | Dual Control, Round |
| Width (mm) | 280 |
|---|---|
| Height (mm) | 1150 |
| Depth (mm) | 360 |
| Flow Rate at 1 Bar (l/min) | 7.9 |
|---|---|
| Flow Rate at 1.5 Bar (l/min) | 9.7 |
| Flow Rate at 2 Bar (l/min) | 11.2 |
| Flow Rate at 3 Bar (l/min) | 13.5 |
| Minimum Water PressureMore information | 1 |
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
